Skip to content

Multiple pipes hanger

The pipe support script that I did publish last year was very popular, so to improve that script, I came to the idea to create a script that will handle multiple pipes.

This script potentially can save a lot of time. The script can recognize space between the pipes, their relative heights, and adjust hanger diameter according to the pipe diameter.

This is the first iteration of the script. There is a lot of room for improvement both for new features and to decrease the script run time.

Please make sure that before you start using this script that you back up your existing project model.

Also, if you want to download this (and all other scripts) with my sample files please visit the Shop page.

The script uses the following Dynamo packages:

Data-Shapes v.2021.2.94
Rhythm v.2021.7.3
Clockwork v.2.3.0
archilab v.2022.210.2022
spring nodes v.204.1.0

5 thoughts on “Multiple pipes hanger”

  1. Hi Nenad,

    I am very impressed with your work, your Multiple pipes hanger script appears to generate the type of pipes hanger that meets the requirements of my up coming project. However, I have zero experience with Dynamo and I am not looking forward to lean Dynamo either. I am happy to purchase this script, but I am not sure whether this script can be successfully implemented into our design workflow.
    Do you mind provide the answers to the enquires below
    1. Will this script works with Revit 2020 & 2021?
    2. Will we need to install the listed Dynamo packages to every Revit workstation running the Dynamo script?
    3. After the script is ran, is it possible to manually adjust the hanger spacing (to resolve clashes)?

    Many thanks,

  2. Dear Nenad,

    Can I have the answer you made to David Lee ? The questions are important for me to buy the scripts.
    And I have one more question :
    Will this script works with Revit 2022 & 2023 ?

    Many thanks,

    1. Dear Guilhem,
      Below are my answers:

      1. Will this script works with Revit 2020, 2021, 2022 and 2023? I did not test the script in those Revit versions.
      2. Will we need to install the listed Dynamo packages to every Revit workstation running the Dynamo script? Yes.
      3. After the script is run, is it possible to manually adjust the hanger spacing (to resolve clashes)? Yes.

Leave a Reply to nenadkovacevic Cancel reply

Your email address will not be published. Required fields are marked *